Skip to main content
Functional Composite Materials
Functional Composite Materials Cover Image

Articles

Page 1 of 1

  1. Sheet Moulding Compound (SMC) based composites have a large potential in industrial contexts due to the possibility of achieving comparatively short manufacturing times. It is however necessary to be able to n...

    Authors: Gustaf Alnersson, Erik Lejon, Hana Zrida, Yvonne Aitomäki, Anna-Lena Ljung and T. Staffan Lundström
    Citation: Functional Composite Materials 2023 4:11
    Content type: Research Published on:

  3. Incorporating inorganic nanomaterials into a polymer matrix is one of the most effective ways to create thermoelectric performance for applications where physical flexibility is essential. In this study, flexi...

    Authors: Joherul Alam, Xiao Su, Hsu-Chiang Kuan, Shahraam Afshar Vahid, Kamil Zuber, Qingshi Meng, Fanzhe Meng, Dusan Losic and Jun Ma
    Citation: Functional Composite Materials 2023 4:9
    Content type: Research Published on:

  4. Aluminium matrix composites (AMC) do combine a high lightweight potential with a wide range of specific mechanical or thermal properties, depending on their material composition or the content of reinforcement...

    Authors: Marco Speth, Kim Rouven Riedmueller and Mathias Liewald
    Citation: Functional Composite Materials 2023 4:8
    Content type: Research Published on:

  5. Graphene enhanced thermoplastic composites offer the possibility of conductive aerospace structures suitable for applications from electrostatic dissipation, to lightning strike protection and heat dissipation...

    Authors: Christopher Leow, Peter B. Kreider, Silvano Sommacal, Christian Notthoff, Patrick Kluth and Paul Compston
    Citation: Functional Composite Materials 2023 4:7
    Content type: Research Published on:

  6. Epoxy is widely used material, but epoxy has limitations in terms of brittleness in failure, and thus researchers explore toughening and strengthening options such as adding a second phase or using electromagn...

    Authors: Raghvendra Kumar Mishra, Danning Li, Iva Chianella, Saurav Goel, Saeid Lotfian and Hamed Yazdani Nezhad
    Citation: Functional Composite Materials 2023 4:6
    Content type: Research Published on:

  7. This review highlights the advantages of incorporating hexagonal Boron Nitride (BN) into the current membrane-based architectures for water remediation over other well-explored 2D nanomaterials such as graphen...

    Authors: Sankeerthana Avasarala and Suryasarathi Bose
    Citation: Functional Composite Materials 2023 4:5
    Content type: Review Published on:

  8. Drone technology is widely available and is rapidly becoming a crucial instrument in the functions of businesses and government agencies worldwide. The demand for delivery services is accelerating particularly...

    Authors: Sinéad Mitchell, Juliana Steinbach, Tomás Flanagan, Pouyan Ghabezi, Noel Harrison, Simon O’Reilly, Stephen Killian and William Finnegan
    Citation: Functional Composite Materials 2023 4:4
    Content type: Research Published on:

  9. A study on electrical conduction of carbon/epoxy laminates has so far been conducted in an ad hoc nature without a standardised method, involving many extrinsic factors. How these factors affect electrical con...

    Authors: Gang Zhou, Ewa Mikinka, Xujin Bao and Weiwei Sun
    Citation: Functional Composite Materials 2023 4:3
    Content type: Research Published on:

  10. The presented work collects results from the evaluation of electrical response to mechanical deformation and formation of defects presented by different polymeric based composite materials with potential for a...

    Authors: Olalla Sanchez-Sobrado, Daniel Rodriguez, Ricardo Losada and Elena Rodriguez
    Citation: Functional Composite Materials 2023 4:2
    Content type: Research Published on:

  11. We report the chemical synthesis of poly(aniline-co-aniline-2,5-disulfonic acid)) and its composite containing L-hexuronic acid and metallic Ag/SiO2 nanoparticles as a new thermally stable anionic polyelectrolyte...

    Authors: Hammed H. A. M. Hassan and Marwa Abdel Fattah
    Citation: Functional Composite Materials 2023 4:1
    Content type: Research Published on:

  12. Self-healing materials can increase the lifetime of products and improve their sustainability. However, the detection of damage in an early stage is essential to avoid damage progression and ensure a successfu...

    Authors: Antonia Georgopoulou, Henry Korhonen, Anton W. Bosman and Frank Clemens
    Citation: Functional Composite Materials 2022 3:9
    Content type: Research Published on:

  14. Silica is the rubber industry’s most essential and cost-effective reinforcing filler after carbon black. The silica reinforcement mechanism with a non-polar elastomer is complicated by the presence of polar fu...

    Authors: Jeevanandham Neethirajan, Arshad Rahman Parathodika, Guo-Hua Hu and Kinsuk Naskar
    Citation: Functional Composite Materials 2022 3:7
    Content type: Review Published on:

  15. Styrene–butadiene–Rubber, SBR, is most often used in tread compounds in order to improve the Rolling Resistance (RR). The functionalized SBRs are used to increase the polymer–filler interaction in the compound...

    Authors: Chigusa Yamada, Atsushi Yasumoto, Tadashi Matsushita and Anke Blume
    Citation: Functional Composite Materials 2022 3:6
    Content type: Research Published on:

  17. The mechanical behavior of braided carbon nanotube yarns (CNTYs) on an elastomeric core to produce stretchable conductive materials were theoretically modeled and experimentally studied under tension. The elas...

    Authors: Avia J. Bar, Joey Mead, Hanna Dodiuk and Samuel Kenig
    Citation: Functional Composite Materials 2022 3:4
    Content type: Research Published on:

  18. The interface between polymer matrices and nanofillers is critical for efficient interaction to achieve the desired final properties. In this work, block copolymers were utilized to control the interface and a...

    Authors: Lilian Azubuike and Uttandaraman Sundararaj
    Citation: Functional Composite Materials 2022 3:3
    Content type: Research Published on:

  19. The exploration of a noble-metal-free and nitrogen-doped carbon (M–N/C) composite electrocatalyst for the oxygen reduction reaction (ORR) remains a great challenge. The activities of the M–N/C composite electr...

    Authors: Bing Zhang, Hele Guo, Longsheng Zhang, Xu Zhang, Chao Zhang and Tianxi Liu
    Citation: Functional Composite Materials 2022 3:2
    Content type: Research Published on:

  25. This paper focuses on the physicochemical changes that happen in cold mix asphalts during curing, and more specifically, while and after transitioning to different simulated seasons. Several tests were carried...

    Authors: Amélie Thiriet, Vincent Gaudefroy, Emmanuel Chailleux, Jean-Michel Piau, Frédéric Delfosse and Christine Leroy
    Citation: Functional Composite Materials 2021 2:12
    Content type: Research Published on:

  26. Traditional laminated composites have fibres oriented only in the in-plane of the laminate due to their manufacturing process, and are therefore very susceptible to transverse cracking and delamination from ou...

    Authors: M. Rashid, J. L. Hanus, K. Chetehouna, K. Khellil, Z. Aboura and N. Gascoin
    Citation: Functional Composite Materials 2021 2:11
    Content type: Research Published on:

  27. Fusion assembly is a highly promising technique for joining thermoplastic composite to thermoset composites, enabling the use of both the most affordable composite material and process for each substructure. H...

    Authors: Henri Perrin, Grégory Mertz, Noha-Lys Senoussaoui, Loïc Borghini, Sébastien Klein and Régis Vaudemont
    Citation: Functional Composite Materials 2021 2:10
    Content type: Research Published on:

  28. Renewable and environmentally responsive materials are an energy- and resource-efficient approach in terms of civil engineering applications, e.g. as so-called smart building skins. To evaluate the influence o...

    Authors: R. Scholz, M. Langhansl, M. Hemmerich, J. Meyer, C. Zollfrank and F. Walther
    Citation: Functional Composite Materials 2021 2:9
    Content type: Research Published on:

  29. Additive manufacturing techniques established a new paradigm in the manufacture of composite materials providing a simple solution to build complex, custom designed shapes. In the biomedical field, 3D printing...

    Authors: Magda Silva, Isabel S. Pinho, José A. Covas, Natália M. Alves and Maria C. Paiva
    Citation: Functional Composite Materials 2021 2:8
    Content type: Review Published on:

  30. This study was carried out using bleached softwood Chemi-Thermo-Mechanical Pulp to evaluate the influence of Molded Pulp Products’ manufacturing process parameters on the finished products’ mechanical and hygr...

    Authors: Claire Dislaire, Yves Grohens, Bastien Seantier and Marion Muzy
    Citation: Functional Composite Materials 2021 2:7
    Content type: Research Published on:

  31. The performance of electric sensors is continuously improving due to the demands of modern vehicles and electronic devices. Magnetic sensors are used in a wide field of applications. However, handling and moun...

    Authors: Moritz Liesegang and Tilmann Beck
    Citation: Functional Composite Materials 2021 2:6
    Content type: Research Published on:

  32. Conventional carbon fibre laminates are known to be moderately electrically conductive in-plane, but have a poor through-thickness conductivity. This poses a problem for functionality aspects that are of incre...

    Authors: Caroline O’Keeffe, Laura Rhian Pickard, Juan Cao, Giuliano Allegri, Ivana K. Partridge and Dmitry S. Ivanov
    Citation: Functional Composite Materials 2021 2:5
    Content type: Research Published on:

  33. The aim of this work is to characterize the moisture-dependent actuation behavior of bioinspired and additively manufactured hygromorphs based by following deductive and inductive design approaches. Fused Fila...

    Authors: Matthias Langhansl, Jörg Dörrstein, Peter Hornberger and Cordt Zollfrank
    Citation: Functional Composite Materials 2021 2:4
    Content type: Research Published on:

  34. Tungsten disulfide (WS2) nanotubes (NTs) are examined here as a filler for polylactide (PLA) for their ability to accelerate PLA crystallization and for their promising biocompatibility in relevant to biomedical ...

    Authors: Fausta Loffredo, Loredana Tammaro, Tiziana Di Luccio, Carmela Borriello, Fulvia Villani, Saverio De Vito, Karthik Ramachandran and Julia A. Kornfield
    Citation: Functional Composite Materials 2021 2:3
    Content type: Research Published on:

  36. Carbon-fibre reinforced composites are seeing increased deployment, especially in the aerospace industry, and the next-generation of these materials will need to meet demanding performance requirements beyond ...

    Authors: Christopher Leow, Peter B. Kreider, Christian Notthoff, Patrick Kluth, Antonio Tricoli and Paul Compston
    Citation: Functional Composite Materials 2021 2:1
    Content type: Research Published on:

  37. Formation of blood vessels during bone regeneration represents a major challenge for tissue engineered constructs. Poor revascularization can lead to scaffold failure and consequently, leads to non-healing fra...

    Authors: Griselda V. Nájera-Romero, Muhammad Yar and Ihtesham Ur Rehman
    Citation: Functional Composite Materials 2020 1:9
    Content type: Research Published on:

  38. This study examines the influence of cellulose nanocrystal (CN) particles on the morphological, thermal, and thermo-mechanical properties of polylactide (PLA)/poly [(butylene succinate)-co-adipate] (PBSA) blen...

    Authors: Mpho Phillip Motloung, Simphiwe Zungu, Vincent Ojijo, Jayita Bandyopadhyay and Suprakas Sinha Ray
    Citation: Functional Composite Materials 2020 1:8
    Content type: Research Published on:

  39. The aim of this study was to identify the effect of material type (matrix and reinforcement) and process parameters, on the mechanical properties of 3D Printed long-fibre reinforced polymer composites manufact...

    Authors: Francis Dantas, Kevin Couling and Gregory J. Gibbons
    Citation: Functional Composite Materials 2020 1:7
    Content type: Research Published on:

  40. Biodegradable films based on thermoplastic corn starch (TPS) and copper particles with antimicrobial capacity were developed. Copper nanoparticles (Cu) and silica coated copper microparticles (Si-Cu) in the ra...

    Authors: Olivia V. López, María E. Villanueva, Guillermo J. Copello and Marcelo A. Villar
    Citation: Functional Composite Materials 2020 1:6
    Content type: Research Published on:

  42. Permanent Rare Earth magnets are becoming more and more important in efficient motors and generators with high energy density. Among them NdFeB magnets are the most employed, with NdFeB having higher remanence...

    Authors: L. Pigliaru, M. Rinaldi, L. Ciccacci, A. Norman, T. Rohr, T. Ghidini and F. Nanni
    Citation: Functional Composite Materials 2020 1:4
    Content type: Research Published on:

  43. Composites of polymers and the graphene family of 2D materials continue to attract great interest due their potential to dissipate heat, thus extending the in-service life of electronic and other devices. Such...

    Authors: Valentina Guerra, Chaoying Wan and Tony McNally
    Citation: Functional Composite Materials 2020 1:3
    Content type: Review Published on:
Submit manuscript

Annual Journal Metrics

2022 Speed
22 days submission to first editorial decision for all manuscripts (Median)
92 days submission to accept (Median)

2022 Usage 
28,605 downloads
4 Altmetric mentions 

  • ISSN: 2522-5774 (electronic)