Skip to main content
Functional Composite Materials
Fig. 7 | Functional Composite Materials

Fig. 7

From: 3D flow and fibre orientation modelling of compression moulding of A-SMC: simulations and experimental validation in squeeze flow

Fig. 7

Some examples of treated images where the fibres a coloured just to distinguish them from each other and to show that they are accounted for in the analysis. The grey area is the matrix. The upper example is from the left position, the middle from the middle position and the bottom from the right position respectively; consequently, the flow direction is to the left in the upper image and to the right in the bottom image

Back to article page