Skip to main content
Functional Composite Materials
Fig. 4 | Functional Composite Materials

Fig. 4

From: Effect of tungsten disulfide nanotubes on crystallization of polylactide under uniaxial deformation and annealing

Fig. 4

WAXS 1D Intensity vs. scattering vector q (left) of PLA (a) and PLA-WS2 0.6% (b) films obtained after integration of the corresponding 2D patterns (on the right) over the azimuth angle: UNST, ST0, ST3 and ST10 films (for each type of sample only the pattern that best reproduces the average behaviour among the different measurements was selected). The intensity scale of the 2D patterns is the same for all the samples. The stretching direction is along the x-axis

Back to article page