Skip to main content

Table 5 Effect of process parameters on GAB model Variables τm, C and K

From: The impact of molded pulp product process on the mechanical properties of molded Bleached Chemi-Thermo-Mechanical Pulp

  Level Pulping time Mould B temperature Moulds C-D temperature Dehydration time Drying time moulds C-D Pressing time moulds C-D
τm 1 0,20 0,07 0,14 0,07 −0,06 −0,001
2 −0,20 −0,07 − 0,14 −0,07 0,06 0,001
C 1 −8,00 −2,51 1,10 −5,02 5,20 −0,16
2 8,00 2,51 −1,10 5,02 −5,20 0,16
K 1 −0,005 −0,001 −0,006 − 0,005 0,004 − 0,001
2 0,005 0,001 0,006 0,005 −0,004 0,001