Skip to main content

Table 4 Resulting effect for each factor tested on water uptake of samples after sorption

From: The impact of molded pulp product process on the mechanical properties of molded Bleached Chemi-Thermo-Mechanical Pulp

Aw Level Pulping time Mould B temperature Moulds C-D temperature Dehydration time Drying time moulds C-D Pressing time moulds C-D
0.10 1 −0.31 − 0.20 0.03 − 0.05 0.07 − 0.04
2 0.31 0.20 −0.03 0.05 −0.07 0.04
0.33 1 0.08 −0.08 0.17 0.004 0.07 0.12
2 −0.08 0.08 −0.17 − 0.004 −0.07 − 0.12
0.50 1 0.003 −0.10 0.22 −0.06 0.06 0.05
2 −0.003 0.10 −0.22 0.06 −0.06 −0.05
0.75 1 0.07 0.19 0.05 0.13 −0.10 − 0.11
2 −0.07 −0.19 − 0.05 −0.13 0.10 0.11
0.98 1 −0.28 0.52 −0.36 0.29 −0.35 0.16
2 0.28 −0.52 0.36 −0.29 0.35 −0.16